Damaged buttons or cracked casing on your Merlin remote? This product is for you. If your remote is still operating your garage door but the button is damaged you can easily replace them with this product.What you receive?1 x Rubber Button Pad1 x Front & Back CasePlease Note: Remote shown on the right is not includedWhat is not included?1 x Remote electronics (internals) –(as shown on the right of the main image)Compatibility

• Merlin+ C945
• Merlin+ 2.0 E945
• Please note the button pad may not line up perfectly but will be suitable.

Instructions:

1. Remove Key ring at base of existing remote
2. Gently insert a flat blade screwdriver into the slot at the bottom left of the remote.
3. Gently pop open the casing of the remote.
4. Remove existing button pad.
5. Replacement with new button pad.
6. Click casing back together.
7. Test the remote.

Disclaimer:
distributes automotive keys, remotes and casingswhich are compatible with the vehiclesproduced by other manufacturers, and which are substitutes for automotive keys, remotes and casings produced by those manufacturers. Except where a product is expressly stated to be a “genuine” product, our productsare not produced by, and are not authorised, endorsed or approved by these other manufacturers.