Free link to the Operating Manual: http://www.directv.com/learn/pdf/Remote_Controls/DIRECTVRC64forWeb.pdf

This remote is NOT backlit

Manual set up

You may still find a setup code that works for your device by stepping through the library codes in your remote. The following instructions will help you do this.
StepNSet
1.Set the “Mode Switch” to the desired mode such as TV for a Television.
2.Press and hold the “Mute” button and the “Select” button until the visible LED blinks twice.
3.Enter the code “991” followed by the “device number” 1 for Televisions
2 for “AUX 1” devices – VCRs or DVDs
3 for “AUX 2” devices – Audio

4. You can step through the setup codes for this mode by pressing the “Channel Up” key to go forward through the codes or pressing the “Channel Down” key to go back to the previous codes.
5. You can try out each code by pressing one or more function keys such as power, volume or digit keys.
6.When you’ve found the setup code that works for your device, press the “Select” key.