The RRAV498 directly replaces the original Yamaha RAV498 remote and other Yamaha AV receiver remotes (listed below). It works right out of the box for compatible Yamaha AV receiver modelsno programming required.

This pre-programmed remote offers essential features, including input selection, full menu controls, and all necessary buttons for seamless operation. Additionally, the RRAV498 can be programmed to control other devices using the included operating manual or the original AV receivers manual.

Important Note: This remote operates only in ZONE 1. If your receiver supports ZONE 2, this remote will not control ZONE 2 functions but will work normally for ZONE 1.

Pre-programmed for Yamaha receiversno setup required.

Designed as a direct replacement for the original Yamaha RAV498 remote.

Includes an instruction manual for easy use.

Can be programmed to control other devices such as TVs, DVD players, and satellite receivers.

Guaranteed compatibility with select Yamaha receivers (refer to the Used with Models section for details).

Common Questions:
How do I program my remote for external devices (i.e., TV, DVD, SAT, etc.)?

• See the code list section of your user manual to find the corresponding code depending on the brand of the device you want to register.
  • Register the first code in the list if there are multiple remote control codes. If that does not work, try the other codes.
• Press the [CODE SET] key using a pointed object, such as the tip of a ballpoint pen.
  • SOURCE/RECEIVER blinks twice.
  • Perform each of the following steps within one minute. Otherwise, the setting will be canceled. If this happens, repeat from step two.
• Press the input selection key.
  • For example, press the HDMI 1 to set the remote control code for the playback device connected to the HDMI 1 jack. 4.
  • Use the numeric keys to enter the 4-digit remote control code.
  • Once the remote control code is registered successfully, SOURCE/RECEIVER blinks twice.
  • If it blinks six times, registration has failed. Repeat Step Two.

How do I Reset the remote control codes?

• You can reset a remote control code registered to each input selection key.
• Press the [CODE SET] key using a pointed object, such as the tip of a ballpoint pen.
  • • SOURCE/RECEIVER Blinks twice
    • Perform each of the following steps within one minute. Otherwise, the setting will be canceled. If this happens, repeat from step one.
  • Press the input selection key you wish to reset.
  • Use the numeric keys to enter 5098. Once the remote control code is reset successfully, SOURCE/RECEIVER blinks twice. If it blinks six times, resetting has failed. Repeat from step one.

How do I reset the remote control to the factory default settings?

• Press the [CODE SET] key using a pointed object, such as the tip of a ballpoint pen.
• Press SOURCE/RECEIVER.
• Use the numeric keypad to enter 9981.

Replaces remote models: RAV464, RAV465, RAV444, RAV498, RAV448, RAV332, RAV293, RAV331, RAV334, RAV336, RAV432, RAV436, RAV431, RAV463, RAV341, RAV346, RAV433, RAV494, RAV290, RAV434, RAV499, RAV435, RAV287, RAV296, RAV345, RAV445, RAV491, RAV521, RAV522

Works with Models: HTR3063, HTR3065, HTR5066, HTR6240, HTR6240BL, HTR6250, HTR2064, HTR2064SZ, HTR3064, HTR4063, HTR4064, HTR4065, HTR4066, HTR5063, HTR6063, HTR6280, RXS600, RXV2065, RXV371BL, RXV373BL, RXV465BL, RXV565BL, RXA1000, RXA1010, RXA1010BL, RXA700, RXA710, RXA800, RXA810, RXV1065, RXV1065BL, RXV367, RXV367BL, RXV371, RXV373, RXV375, RXV375BL, RXV377, RXV377BL, RXV465, RXV467, RXV467BL, RXV471, RXV471BL, RXV473, RXV473BL, RXV475, RXV477, RXV565, RXV567, RXV567BL, RXV571, RXV573, RXV573BL, RXV575, RXV577, RXV665, RXV667, RXV671, RXV671BL, RXV765, RXV867, RXV867BL, RXV871, YHPS101, YHT393, YHT393BL, YHT395, YHT493, YHT493BL, YHT494, YHT495, YHT495BL, YHT497, YHT591, YHT599U, YHT699U, YHT791, YHT799U, YHT899U, YHT4910U, YHT4910UBL, YHT497BL, YHT593, YHT593BL, YHT595, YHT595BL, YHT597, YHT597BL, YHT693, YHT693BL, YHT695, YHT695BL, YHT697, YHT797, YHT797BL, YHT893, YHT897, YHT897BL